• Prohydrojasmon
• Tildipirosin
• Flometoquin
• Oxazosulfyl
• Fenhexamid
• Cartap, Thiocyclam and Bensultap

• TBS/AFDC 3(73)P3 Methods for determination of organic preservatives in foodstuffs - This standard prescribes the methods for determination of sorbic acid and its salts used as preservatives in foodstuffs
• TBS/AFDC 3(71)P3 Methods for determination of organic preservatives in foodstuffs - This Tanzania standard prescribe the methods for determination of benzoic acid and its salts used as preservatives in foodstuffs
• TBS/AFDC 3(72)P3 Methods for determination of organic preservatives in foodstuffs - This standard prescribes the methods for determination of propionic acid and its salts used as preservatives in foodstuffs
• TBS/AFDC 2(230) P3 Specification for Plastic Materials for Food Contact Applications - This Standard prescribes requirements, method of sampling and testing for polyethylene (in the form of granules or powder) for the manufacture of plastic items used in contact with foodstuffs.
• TBS/AFDC 2(65) P3 Specification for plastic materials for food contacts applications - This Tanzania Standard specifies requirements, sampling and test methods for polystyrene (crystal and high impact) materials for the manufacture of plastic items used in contact with foodstuffs
• TBS/AFDC 2(69) P3 Polyethylene Terephthalate (Pet) Bottles for Packaging of Edible Oils - This standard prescribes the requirements, methods of sampling and testing for the polyethylene terephthalate (PET) bottles for packaging of edible oils.

• Audio/video, Information and Communication Technology Equipment-Part 1: Safety Requirement
• Rock Drilling Machinery and Pneumatic Tools - Safety Requirements
• Content Limitation of Mercury, Cadmium and Lead for Zinc Anode Primary Battery
• Requirements of restricting excessive package foods and cosmetics
• Hygiene specification for feed processing machinery
• Security technical requirements for critical network devices
• Indoor decorating and refurbishing materials 

• Protection of the occupants in the cab of commercial vehicles - State Administration for Market Regulation publishes standard specifies safety requirements and test methods for the protection of the occupants in the cab of commercial vehicles.
• Safety rules for elevating work platforms - This standard specifies safety - technical requirements of design, manufacture, installation, use, maintenance for elevating work platforms.
• Steering system of motor vehicles–basic requirements - This standard specifies the basic technical requirements and test methods for the steering system of motor vehicles.
• Continuous casting machines safety technical conditions - This standard specifies the safety requirements for continuous casting equipment in order to prevent injury or health hazards during the design, manufacture, assembly, transportation, installation, adjustment and test run, operation, maintenance and shutdown of the operation.
• Automobiles and trailer-specifications and test methods of brake parts - This standard specifies the terms and definitions, test related requirements, technical requirements and test methods, packaging and marking, and product consistency of brake replacement parts such as brake linings, brake shoe assemblies, pad assemblies, brake drums and brake discs, etc.  for automobile and trailer brake systems.
• Safety rules for en-masse conveyors - This standard is not applicable to conveyers that convey corrosive materials, or materials with a bulk density over 1.8t/m3 or materials with special physical properties, or to conveyers that are used under the environment with explosive gases or combustible dust.
• Centrifuge safety requirements - This standard also specifies the usage information of centrifuges and the inspection and judgment methods of the safety performance of centrifuges. This standard is applicable to all industry centrifuges (including industry dehydrator).
• Safety technical specification for glazing materials used in power-driven vehicles - This standard is applicable to glazing materials used in power-driven vehicles including vehicles Class M, Class N, Class O, Class L with cab, and agricultural and forestry vehicles. This standard is not applicable to the glazing materials used for lighting and signalling devices and instrument panels of power-driven vehicles.
• Solid cyanide package - This Standard specifies the classification, packaging form, packaging structure, specifications, requirements, test methods, inspection rules, identification, transportation and storage of solid cyanide
• Lithium ion cells and batteries used in stationary electronic equipment’s - This standard specifies the safety requirements for lithium ion cells and batteries used in stationary electronic equipments and describes the corresponding test methods.
• Fertilizer marking - This standard applies to all fertilizers sold within the China and are not applicable to those products that are manufactured specifically for the user under contract and are not circulated on the market.  

Please share your feedback on pratiknavale@fieo.org to help us serve you better.