China - State Standard of the People's Republic of China: Indoor Decorating and Refurbishing Materials - Limit of Formaldehyde Emission of Wood-based Panels and Finishing Products Standardization Administration of China (SAC)specifies standard for the formaldehyde emission limit of wood-based panels and finishing products for indoor decorating and refurbishing as well as test methods, decision rules and the inspection report requirements thereof. The standard applies to the formaldehyde emission amount of wood-based panels and finishing products, such as fibreboard, particleboard, plywood, blockboard, reconstituted decorative lumber, laminated veneer lumber, glued-laminated timber, surface decorated wood-based panel, wood-based floor, wood-based panel, wood-based door, and wood-based window. Products covered : Fibreboard, particleboard, plywood, blockboard, reconstituted decorative lumber, laminated veneer lumber, glued-laminated timber, surface decorated wood-based panel, wood-based floor, wood-based panel, wood-based door, wood-based window and other various types of wood-based products. Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm. (HS 4407), Particle board and similar board (for example, oriented strand board and waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances. (HS 4410), Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. (HS 4411), Plywood, veneered panels and similar laminated wood. (HS 4412), Densified wood, in blocks, plates, strips or profile shapes. (HS 4413). Wood-based panels in general (ICS 79.060.01). Proposed date of adoption : April 2017 Proposed date of entry into force : To be determined Final date for comments : 60 days after circulation by WTO Secretariat |
.gif)
