Kenya - Kenya Bureau of Standard notified standard for Cold rolled steel sections, Steel fabric for reinforcement of concrete, Weld mesh, Steel for the reinforcement of concrete Kenya Bureau of Standard notified standard for following products; KS 104: 2017 Cold rolled steel sections - Specification This Standard specifies the dimensions and sectional properties of cold rolled steel sections of thicknesses up to 8 mm for use in structural and general purpose applications. Click below to view this Proposal/Notification/regulation:- https://members.wto.org/crnattachments/2017/TBT/KEN/17_1422_00_e.pdf KS 574: 2017 Steel fabric for reinforcement of concrete— Specification This Standard covers the requirements for hard-drawn steel wire fabric for the reinforcement of concrete consisting of hard-drawn wire with cross wires welded to them. Click below to view this Proposal/Notification/regulation:- https://members.wto.org/crnattachments/2017/TBT/KEN/17_1424_00_e.pdf KS 2177: 2017 Weld mesh - Specification The standard covers the requirements for weld mesh for general engineering works. Click below to view this Proposal/Notification/regulation:- https://members.wto.org/crnattachments/2017/TBT/KEN/17_1425_00_e.pdf KS 2712: 2017 Steel for the reinforcement of concrete - Weldable reinforcing steel - Bar, coil and decoiled product - Specification The Standard specifies requirements for ribbed weldable reinforcing steel used for the reinforcement of concrete structures. The standard covers steel delivered in the form of bars, coils and decoiled products. The standard contains provisions for three steel grades, all of 500 MPa characteristic yield strength, but with different ductility characteristics. The three grades are B500A, B500B and B500C. Click below to view this Proposal/Notification/regulation:- https://members.wto.org/crnattachments/2017/TBT/KEN/17_1426_00_e.pdf Proposed date of adoption: September 2017 Proposed date of entry into force: Upon declaration as mandatory by the Cabinet Secretary, Ministry of Industry, Trade and Cooperatives Final date for comments: 6 May 2017 |