Uganda proposed Standard for Needles Used in Surgical Sutures Uganda National Bureau of Standards proposed following: 1) DUS 1961: 2018, Standard Test Method for Bend Testing of Needles Used in Surgical Sutures: Uganda Standard describes the procedure for bend testing needles used for the placement of surgical sutures. This test method provides a means of assessing the yield moment and maximum moment of a surgical needle. 2) DUS 1962: 2018, Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures: Uganda Standard describes the procedure for penetration testing sharp and blunt needles used for the placement of surgical sutures. It only describes the test procedures (Phase 1) and does not define a test medium at this time. Test media will be address in the next phase (Phase 2) of this test method’s evolution. This test method applies to straight and curved surgical needles. This test method does not intend to address the value of the test with respect to actual conditions of use. In this test method, it is assumed the needles used for this test have passed all applicable quality standards and have no physical malformation that would inappropriately influence the test results. This test method quantifies the force required for a needle to pass through a medium and its ability to do so multiple times. Product covered:- Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments , Needles Used in Surgical Sutures HS code: 844851, 9018 Proposed date of adoption: June, 2018 Proposed date of entry into force: NA Final date for comments: 12-06-2018 |